Making a comfort short/body stocking hybrid

How many of us wish we could pair that staple of belly dancer’s wear, the body stocking, with that other staple of the curvy girl’s wardrobe, the comfort shorts? I know I’ve been wanting one ever since realising that every time I wore middrif-baring costume, I kept having layers upon layers of clothes, as most of us will wear the comfort shorts for shaping and avoiding discomfort too, and sometimes, with some of the more lacy costumes, it’s nice to have a bit of modesty around the legs, just in case.

Still, much as it does sound like common sense, I have yet to see anything like this in the market, so each time I was putting on costumes, particularly my ATS styles, I’d need to go with the body stocking, the short leggings, then the pantaloons, then the skirts… Today I made a stretch velvet mermaid skirt to pair with existing (and upcoming) costume pieces, and realised that I needed a stomach cover, and since I had a matching colour power mesh, I decided to experiment.

You will need some stretch cotton, powermesh, and a pattern for leggings that fit you. Failing that, you can use cyclist shorts, leggings -if you don’t mind the length- or even tuck-me-in-pants, although these can often have quite a bit of structural detail that might alter the pants if you cut them, and also, these can be quite expensive and therefore not suitable for experimenting. You will also, ideally, need an overlocker, as you can sew the powermesh with a standard machine, but in that case you will need to reinforce the seams thoroughly and probably use spiral stitch to “wrap” the seam allowances.

Some time ago, I was thinking of doing my own tribal pants, and made a proof of concept cyclist shorts using cotton jersey to try the fit; they were waistless and rather low on the hip, therefore ideal. I won’t go over how I obtained the pattern, as it’s long and complicated and full of potential issues, so I strongly suggest you find a pattern for sports clothing to obtain this. If you don’t happen to have anything this convenient, I would suggest picking a cheap pair of cyclist leggings from your favourite shop or even supermarket. The top on these normally comes up to the waist, so you will be chopping it off. To make sure you don’t make a booboo, put them on and have a friend mark around your body a bit below the level where your usually wear your belts, so there’s no accidental panties exhibition. Cut a bit above this marked line to have enough seam allowance to join the body stocking. A possible (might be necessary) extra modification would be to split the crotch so you don’t need to remove all the layers to use the facilities, although whether you add this or not depends a lot on how long you usually stay in costume… if you take part in full-day events, then you definitely should consider doing this!

Body Stocking pattern

Body Stocking pattern

For the body stocking, I took measurements for my underbust, waist and hip -at the level the leggings end-, then divide by two; measure distance from the bottom of your bra to your hip line; trace all these measurements down onto paper, remembering that you’re doing half, and you’ll be cutting two of these pieces. Depending on your body shape, you might end with a rectangle, trapezoid or even something like an funnel. Take a look at the diagram on the left to give you an idea of how to create your pattern.

BodyStocking seam

Seams close-up

Pick your powermesh and check the stretching, I reduced about 10cm (4″) on each width-wise measurement, after making sure that it could stretch that much. I left the length the same as sideways stretching can sometimes reduce the length of the body stocking. Powermesh is very slippery, so I folded mine, and pinned down all around the edges to make sure it stayed in place, then marked the piece and pinned all around the inside so it would remain stable and both pieces I cut would be identical. Once you’ve got both your pieces, overlock or sew the edges, then attach to the cyclist shorts. You might need to experiement as the mesh part might be smaller than the shorts’ waist. What I did was to put the mesh tube on and the shorts on top, mark where the shorts reach on the tube, then remove everything, and pin it all with the right sides together. If you want this seam on the inside, you will probably have to pin the tube upside down and shoved inside the pants to be able to attach it… when you pull it up, the seam will be closest to your skin. Again, experiment to see what works best for the effect you want.

finished bodystocking

Finished piece

All that is left after that is figuring out the method to keep the body stocking in place, although this will differ depending on what you are wearing on your upper body. There’s no reason to try to reinvent the wheel, so you can just create some small loops with ribbon to use clear straps to keep everything in place, and of course you can go with the time-honoured safety pins. And you’re done! You can see the final result on the left, modelled by the trusty white pillow. I made a dip at the front as I tend to prefer that shape, but that is a personal choice, but if you prefer a straight line, just go for it!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *